JT/T 808
Where it connects
| Region | TCP |
|---|---|
| GCC | ingest.gcc.zaitrack.app:17104 |
| Europe (west) | ingest.eu-west.zaitrack.app:17104 |
| US East | ingest.us-east.zaitrack.app:17104 |
| US West | ingest.us-west.zaitrack.app:17104 |
| Asia Pacific (south) | ingest.apac-south.zaitrack.app:17104 |
Set it up
In the recorder's or tracker's network settings: the main server's host and the TCP port.
Register the device with its terminal ID (the number sent in its protocol header). Use the device’s configured terminal number, not the vehicle registration or the platform’s tracker UUID. Confirm the number against the intended tracker before changing its server settings.
Video recorders (Streamax, Howen, Jimi and other MDVRs): only the signalling port is set. Live video, playback and alarm evidence go to video.ingest.<region>.zaitrack.app; the platform tells the recorder when a camera is watched.
Huabao e-locks use the same port.
Check
Trackers → the device → Connect shows the host and port for your region. Check Health, then confirm that a recent report appears under the correct tracker and organisation with the expected location and time. A network connection alone does not prove correct reporting or command support.
Terminal identity and reconnects
The updated connection check binds a JT/T 808 session to the terminal number resolved when it connects. Later reports and recognised command answers must name that same terminal. A report from a different terminal is refused instead of being attributed to the connected tracker.
The showcase now includes the updated JT/T 808 connection-check components. Confirm a new report from the actual tracker under the intended device and organisation before relying on the connection. After a compatible update, an existing session may need to reconnect to establish new connection state. Use the agreed maintenance procedure; do not change the terminal number to work around a refusal.
If reporting stops after an update, confirm the configured number, reconnect the tracker and check a new report. Record the model, firmware, UTC time and request identifier for support. Do not include authentication codes, APN passwords or raw parameter replies in a ticket.
Matching the terminal number is not device credential authentication. Segmented JT/T 808 messages remain unsupported by this codec. A successful location report does not certify every firmware variant, video workflow or remote lock/unlock command.